Attentions should be paid to installing tubing, hydraulic pumpshydraulic componentsthe hydraulic system
Considerations for installing tubing in hydraulic systems:
1, oil suction pipe should be installed on the filter;
2, oil suction pipe should not leak, the joints must be tight and sealed;
3. The oil return line shall be inserted below the oil level of the tank to prevent splashing foam and mixing with air;
4. The return valve shall not be connected with the inlet of the hydraulic pump;
5, the solenoid valve leakage of oil, the oil must be set back to prevent leakage back to the oil back pressure, to prevent movement of the spool;
6, all the piping should be installed two times, the first test installation, second formal installation. After loading, remove the tubing and wash it with 20% sulfuric acid or hydrochloric acid solution. Then use 10% of soda water and rinse it with warm water until two days after drying. Note that no sand or oxide shall be allowed during installation.
Foshan Hong Peng Hydraulic Co., Ltd. specializes in maintaining all kinds of hydraulic systems, hydraulic pumps, hydraulic valves, oil cylinders, to undertake various hydraulic systems design. Welcome customers to consult, the national service number 4006622328.